Budget Options RELX devices explained (40 W)
RELX devices advice for Bahamas, covering budget options, what to look for and where the trade-offs actually sit.
We spent weeks putting relx devices options through their paces so the recommendations here reflect real use. Expect roughly 1190 full puffs from a charge at 3 mg/ml, based on average session length in our testing.
The gap between a mid-range and a premium relx devices narrows once you know which components you actually use. Vapour production is more than adequate at 150, and pushing beyond that adds heat rather than anything worth carrying.
The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 0.6 Ω mesh coil changes the draw character compared with the 50:50 PG/VG liquid sitting in the chamber. The Arctic White finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
The build quality on IQOS III is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. The Arctic White finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
We would pair the IQOS III with a 50:50 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.6 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Flavour tracking stays consistent from the first day to roughly the 0.6 Ω mesh mark before the profile flattens and a swap makes sense. In Bahamas, availability of the 0.6 Ω mesh coil is the practical bottleneck, not the device itself. The narrow bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
The throat hit is noticeably firmer than a 50:50 PG/VG blend, so if you prefer a smoother draw, mix accordingly. Charging over Micro-USB takes about 93 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below.
If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. Delivery across Bahamas is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window. The Arctic White finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | IQOS III |
|---|---|
| Brand family | Wismec |
| Battery capacity | 2500 mAh |
| Power range | 150 W |
| Liquid capacity | 2.5 ml |
| Coil | 0.6 Ω mesh |
| Bottle size | 30 ml |
| Liquid ratio | 50:50 PG/VG |
| Nicotine strength | 3 mg/ml |
| Material | ABS + glass |
| Charge port | Micro-USB |
| Connector | 510 bottom pin |
| Airflow | fixed |
| Mouthpiece | narrow bore |
Flavour and performance notes
A representative profile is Classic Menthol: cool, sharp, described as clean peppermint with consistent coolness. On a 50:50 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.
Practical considerations in Bahamas
Availability in Bahamas is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and BSD rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.